Fresh Grout. New Silicone. Epoxy Sealed.
A Shower That Looks — and Stays — Like New.
Townsville's tropical climate — intense UV, year-round humidity, and wet season downpours — ages grout and silicone faster than almost anywhere else in Australia. When the surface looks tired and the seal has gone, you need more than a cosmetic fix. Surface Seal combines re-grouting and re-siliconing with epoxy coating so the shower looks renewed and is properly sealed from the inside out. One visit. 24–72 hours.
The Full Picture. Done in One Visit.
In North Queensland's climate, re-grouting alone isn't enough. Heat and humidity break down the substrate behind new grout almost immediately. Surface Seal combines all three steps so the renewal is backed by a permanent waterproof bond — not just a fresh-looking surface.
Re-Grouting
Grout fills the joints between tiles. Over time it absorbs water, cracks, discolours, and harbours mould. We remove the old grout with a grout saw and replace it with fresh, properly mixed and finished grout.
Re-Siliconing
Silicone seals the expansion joints at corners, edges, and the shower base. We remove the old bead entirely and apply a fresh, properly adhered silicone seal — clean bead, correct tool, properly cured.
Epoxy Sealing
A professional-grade roll-applied coating that bonds from the inside out. It fills micro-cracks and pores across the entire shower surface — tiles, grout, and joints — creating a continuous waterproof membrane.
Why Epoxy Completes the Job
Fresh grout and new silicone restore the look — but without epoxy coating, moisture can still work through the surface over time. Epoxy bonds from the inside out and creates a continuous waterproof seal across the entire shower, not just the joints. The result is a shower that looks revitalised and stays properly sealed.
We'll Tell You Honestly What Your Shower Needs.
Every shower is different. Before we recommend anything, we look at the actual condition — not just the surface. Here's how we assess it.
When the full combination is right:
- Grout is deteriorated, cracked, or heavily moulded
- Silicone is peeling, hardened, or discoloured
- Shower has mild moisture ingress or wants a full revitalisation
- Property being prepared for sale or new tenancy
- You want the surface looking new AND properly sealed
When epoxy-only is right:
- Grout and silicone are in sound condition already
- Waterproofing has failed but the surface looks fine
- Had re-grouting done elsewhere and now needs proper sealing
- Want the epoxy bond without a full surface renewal
Surface Seal Townsville does not offer re-grouting or re-siliconing as standalone services. These are always combined with epoxy coating, because renewing the surface without sealing it doesn't deliver a lasting result.
Not Every Shower Needs the Same Fix. Here's How We Figure Out Yours.
Homeowners — Revitalise & Seal
Your shower looks tired. The grout's gone off, the silicone's peeling, and cleaning doesn't fix it. We regrout, resilicone, and epoxy seal so it looks brand new and stays that way.
Landlords & Agents — Pre-Sale & Pre-Tenancy
A clean, sealed bathroom gets better rent and better offers. We make the shower look maintained and ensure everything is properly waterproofed before handover or listing.
Property Managers — Maintenance Requests
Tenant reports mouldy grout or peeling silicone. You need a reliable trade that shows up, does it right, and provides documentation. That's us.
Done Properly. Done Once. Back in 24–72 Hours.
Photos & Assessment
Send us a few photos. We assess what's needed — combined treatment or epoxy-only — and come back with a clear, fixed quote. No site visit required.
Substrate Preparation
Old grout cut back with a grout saw. Silicone fully stripped. Surface cleaned and dried — a proper base before anything new goes down.
Re-Grout & Re-Silicone
Fresh grout applied to a professional standard. New silicone laid in one clean, continuous, correctly-tooled bead at all joints and corners.
Epoxy Coating
Epoxy rolled over the renewed surface — bonding to tiles, grout lines, and silicone joints. Creates a continuous waterproof membrane across the entire shower.
Cure & Handover
Shower out of use for 24–72 hours while the epoxy cures fully. Written aftercare instructions and a signed 10-year warranty left with you on the day.
Honest Answers. Plain Language.
Will re-grouting fix my leaking shower?
Sometimes — but only if the waterproofing behind the grout is still intact. In Townsville's climate, that's rarely the case once grout has started to visibly fail. That's why we don't do re-grouting on its own — we pair it with epoxy sealing so the renewal is backed by a proper waterproof bond, not just a fresh look.
Do you do re-grouting without epoxy sealing?
No. Surface Seal Townsville does not offer re-grouting or re-siliconing as standalone services. These are always combined with epoxy coating — because renewing the surface without sealing it doesn't deliver a lasting result. Epoxy can, however, be done without re-grouting where the grout is in sound condition.
How long does the shower need to be out of use?
After a combined re-grout, re-silicone, and epoxy treatment, the shower needs 24–72 hours before use — the upper end applies to larger bathrooms or those requiring more preparation. We'll give you exact timing and written aftercare instructions on the day.
Can you do epoxy sealing without re-grouting?
Yes. If the grout and silicone are in sound condition, we can apply epoxy sealing as a standalone service. The same 24–72 hour turnaround applies. We'll confirm this during the assessment.
Is this worth doing before selling a house?
Almost always yes. A shower with fresh grout, clean silicone, and a properly sealed surface reads as well-maintained to buyers and building inspectors. In Townsville's rental and resale market, wet area condition is a common point of negotiation — a fresh, warranted seal removes it from the equation. The 24–72 hour turnaround fits even a tight pre-sale schedule.
What's the difference between re-grouting and epoxy sealing?
Re-grouting replaces the grout between tiles — it restores the look but doesn't waterproof below the surface. Epoxy sealing bonds from the inside out and creates a continuous waterproof membrane across the whole shower. We do both together — so the shower looks revitalised AND is properly sealed.
How do I know if I need the full treatment or just epoxy?
Send us a few photos and we'll tell you. If your grout is deteriorated, cracked, or heavily moulded, the full combination treatment is usually the right call. If the surface is in reasonable shape but you're getting a leak or want it properly sealed, epoxy alone may be enough. We'll give you an honest answer — no upsell.
Ready for a shower that looks new — and actually stays that way in our climate?
Send us a few photos and we'll come back with an honest assessment and a clear quote. No site visit required. No obligation. Most Townsville enquiries receive a response within the same business day.